P44 Single Liquid Filter Cartridge Housings

  Flow Rates Up to 20 GPM

Purolator's Model 44 Liquid Cartridge housing gives the versatility of choosing cartridges for the needed flow rates, chemical compatibility and particle retention. They are a good choice to use in applications where a low micron retention is required. Model P44 accommodates one element in either 10, 20, 30, or 40 inch lengths.


  • Carbon or stainless steel construction
  • Plated quick swing closure with eye nuts
  • Buna lid seal
  • 316 SS cup & spring assemblies
  • 300 PSI pressure rating
  • Differential, drain, and vent ports
  • 316 SS center guide post
  • Epoxy paint - inside and out - on carbon steel
  • Duplexing for continual flow during maintenance
  • Higher pressure rating
  • ASME code U or UM
  • Adjustable support legs
  • Specify element type
    • DOE (Double Open Ended) cartridges
    • 222 style O-ring with closed top cap
    • 226 style with closed top cap
NOTE: Element is not included in the filter,
but the type of element must be specified at
time of housing order.

Purolator's two-page brochure (126kb) that contains complete technical information about the P44 liquid cartridge housings.
Products |Markets Served | Company Info | Request a Quote | Downloads | Tools/Calculators| Locate a Distributor | Contact Us | Home | Site Map | | Careers